Search services, guides and terms

Try "breaker", "panel", "EV charger" or a city. Press Esc to close.

Electrical services in Southlake, TX

Residential and commercial electrical work across Northeast Tarrant and South Denton County. Each page lists what is included and the signs you need it.

A wall of electric meters and disconnects with new conduit, wired by Daniel Electric

Breaker check

What is your electrical system doing?

Flip the breaker that matches what you see. You get the usual causes, what you can safely check yourself, and who fixes it.

Safety first. Keep away from anything hot, sparking or smelling of burning, and call a licensed electrician now. If you see smoke or fire, get out and call 911.

What do you see?

Circuit 01

Breaker keeps tripping

Common causes

  • Too many devices on one circuit, which overloads it
  • A faulty appliance or cord that trips the circuit each time
  • A worn breaker or a loose connection inside the panel

What you can safely check

  • Note which room tripped and what was running at the time
  • Unplug any appliance that seems to trigger it, and leave it unplugged
  • If it trips again with nothing plugged in, leave it off and call a licensed electrician

Circuit 02

Lights flicker or dim

Common causes

  • A loose bulb, or a worn dimmer or fixture
  • A large appliance pulling power when it starts
  • A loose connection in a fixture, an outlet or the panel

What you can safely check

  • Check that the bulb is the right type and wattage for the fixture, and screw it in snugly
  • Note whether it is one fixture, one room or the whole house
  • If you also hear buzzing or smell burning, treat it as urgent and call

Circuit 03

Outlet or switch is warm or buzzing

Common causes

  • A loose or worn connection behind the cover plate
  • An overloaded circuit, or a plug that fits loosely
  • Damaged wiring or an outlet or switch that is failing

What you can safely check

  • Turn off the circuit at the breaker if you can do it safely, and call a licensed electrician right away
  • Do not use the outlet or switch, and keep cords and anything that burns away from it
  • Do not remove the cover plate or touch the wires

Circuit 04

Burning smell or sparks

Common causes

  • Overheated wiring, insulation or a loose connection
  • A failing outlet, switch, fixture or appliance cord
  • An overloaded or failing panel or breaker

What you can safely check

  • Turn off the circuit at the breaker if you can do it safely, and call a licensed electrician right away
  • If you see smoke or flames, or the smell is strong, get everyone out and call 911
  • Do not open the panel or any cover plate, and do not use the circuit until an electrician checks it

Circuit 05

Power is out in part of the house

Common causes

  • A tripped GFCI outlet that also protects other outlets
  • A breaker tripped by an overloaded circuit
  • A utility outage or a problem with the service to your home

What you can safely check

  • Look outside. If neighbors have no power, report it to your utility, and if you see a downed line, stay far away and call 911
  • Find the GFCI outlets in bathrooms, the kitchen, the garage and outdoors, unplug the devices, and press RESET
  • If the power does not come back, call a licensed electrician

Circuit 06

GFCI will not reset

Common causes

  • A damaged appliance or cord causing a ground fault
  • Water in an outdoor or damp-area outlet
  • A worn-out GFCI that has failed

What you can safely check

  • Unplug everything on the GFCI and on any outlets it protects, then press RESET again
  • Plug in one device at a time to find the one that trips it, and leave that one unplugged
  • Do not remove the cover plate. If it still will not reset, call a licensed electrician

Circuit 07

EV charger trips or will not charge

Common causes

  • The charger or car found a fault and stopped the charge
  • The circuit is overloaded by other loads, or a breaker tripped
  • A worn, loose or overheated outlet, plug or connection

What you can safely check

  • Read the charger's status light and manual, and note any fault color or code
  • Unplug the charger from the car, wait a minute, and plug it in once more
  • If the plug or charger is hot, smells of burning or trips again, stop using it and call

Circuit 08

Parking lot lights are out

Common causes

  • Failed lamps, ballasts or LED drivers
  • A photocell, timer or control that stopped switching
  • A tripped breaker or a wiring fault on the lot circuit

What you can safely check

  • Note which poles are dark, when it started, and whether it is one pole, a group or all of them
  • Look from the ground only. Do not open pole bases or control boxes
  • If a pole is damaged or a wire is down, keep people away and call 911 and the utility

TECL #21005 · Family owned since 1988

Need an electrician in Southlake?

Call and tell us what is going on. A photo of the panel label or the problem helps us come prepared. Quotes on new installations are free.

A Daniel Electric bucket lift raised to a parking lot light pole
Call nowGet a quote