--- title: "Power Strips, Surge Protectors, and Extension Cords: What Is Safe" description: "Learn how power strips, surge protectors, and extension cords differ, which devices should never use them, and when too many cords mean you need more outlets." url: https://danielelectric.multisites.ai/blog/power-strips-surge-protectors-extension-cords publisher: Daniel Electric phone: +1-817-481-8606 quote: https://danielelectric.multisites.ai/contact --- # Power Strips, Surge Protectors, and Extension Cords: What Is Safe Extension cords and power strips are for temporary, light use. A surge protector guards electronics from spikes but does not add capacity. Plug big appliances and heaters straight into the wall. If you rely on cords every day, ask a licensed electrician about adding outlets or circuits. SafetyPublished July 20, 20264 min read ## What is the difference between a power strip, a surge protector, and an extension cord? An extension cord moves one outlet to a new spot. A power strip gives you several outlets from one plug. A surge protector is a power strip with parts that absorb brief voltage spikes. None of them adds capacity to the circuit behind the wall. Item What it does What it does not do Extension cord Reaches an outlet that is far away Replace permanent wiring Power strip Adds outlets from one plug Protect against a [surge](https://danielelectric.multisites.ai/glossary/surge) Surge protector Helps absorb short voltage spikes Make an overloaded circuit safe [Point-of-use surge protector](https://danielelectric.multisites.ai/glossary/point-of-use-surge-protector) Protects the devices plugged into it Protect the rest of the house [Whole-house surge protector](https://danielelectric.multisites.ai/glossary/whole-house-surge-protector) Installed at the panel to guard the whole home Replace plug-in protection for sensitive devices All of these draw from one outlet and one circuit. If that circuit is already near its limit, a strip makes the problem hidden, not smaller. Read more about the risk in our post on [why a breaker keeps tripping](https://danielelectric.multisites.ai/blog/breaker-keeps-tripping). ## Which devices should never use a cord or strip? Heaters and large appliances should go straight into a wall outlet. NFPA says major appliances such as refrigerators, dryers, washers, and stoves “should be plugged directly in a wall receptacle outlet.” It adds that extension cords and plug strips should not be used for them. NFPA adds that only one heat-producing appliance, such as a coffee maker, toaster, or space heater, should be plugged into a receptacle outlet at a time. These devices draw a steady, heavy load, so a heater is a poor match for a cord or strip. ### Can I plug a power strip into another power strip? No. Do not plug extension cords or strips into one another. Each link adds a connection that can loosen and heat. It also hides how much load sits on one wall receptacle. Use one strip, rated for the load, plugged into the wall. ## How should I use an extension cord safely? Use a cord that suits the device and the place, and only for a short time. CPSC says: “Use extension cords only when necessary and only on a temporary basis.” It also says not to use cords “to compensate for inadequate home wiring.” 1. Check the rating on the cord against the label on the device. Use a cord with an equal or higher rating. 2. Choose a cord marked for outdoor use if it will be outside. 3. Look for a mark from an independent testing lab, such as UL or ETL, on the cord. 4. Do not run cords under rugs, through doorways, or through walls. Covered cords cannot release heat. 5. Stop using any cord that feels hot, or that has cracks, bare wire, or loose plugs. CPSC gives most of these points. Throw away a damaged cord. Do not tape it. ## When is a surge protector worth using? A surge protector is worth using on electronics such as computers, TVs, and game systems. A [surge protective device](https://danielelectric.multisites.ai/glossary/surge-protective-device) has a limited life, and some strips only look protective. Check the label for a testing lab mark and read the manufacturer’s notes. Plug-in units protect only what is plugged into them. A whole-house unit goes at the electrical panel and covers the entire home. Daniel Electric lists whole-house surge protection on its whole-house surge protector page. If you are unsure which protection fits your home, ask. ## What does it mean if I rely on cords every day? Daily reliance on cords means the home has too few outlets where you need them. ESFI says: “Heavy reliance on extension cords is an indication that you have too few outlets to address your needs.” It recommends that you have additional outlets installed where you need them. An electrician can add outlets, and for a high-draw appliance, a [dedicated circuit](https://danielelectric.multisites.ai/glossary/dedicated-circuit). That work happens inside walls and panels, so it needs a licensed electrician. See our [residential electrician](https://danielelectric.multisites.ai/electrician) page for the work Daniel Electric lists. ## What should I look for when I shop? Read the package and the product itself. CPSC advises looking for a certification label from an independent testing lab, such as UL or ETL, on the package and on the product. For power strips and surge protectors, CPSC says to check the underside of the casing for the maker’s name and the testing lab. Check Why it matters Testing lab mark (UL or ETL) Shows the product met an industry safety standard Cord rating Must meet or exceed the power needs of what you plug in Indoor or outdoor marking Outdoor cords guard against shock outside Three-prong plug Keeps the ground connection in place Built-in breaker or switch Gives you a way to cut power to the strip Never cut off the ground pin to make a plug fit. Removing the ground pin takes away a shock protection. If your outlets are two-slot, ask a licensed electrician about your options. Do not use an adapter to get around the problem. ## Next step If cords and strips fill your rooms, call Daniel Electric at (817) 481-8606 or use the quote form at [/contact](https://danielelectric.multisites.ai/contact). Daniel Electric says it offers free quotes on new installations. See the [whole-house surge protector](https://danielelectric.multisites.ai/whole-house-surge-protector) page for panel-level protection. ## Frequently asked questions ### Can I plug a space heater into a power strip? No. A space heater draws a large amount of power for hours. NFPA says to use only one heat-producing appliance, such as a space heater, on an outlet at a time, and big appliances belong in the wall. Plug the heater directly into a wall outlet, and keep it away from anything that can burn. ### Is a surge protector the same as a power strip? No. A basic power strip only adds outlets. A surge protector also has parts meant to absorb voltage spikes. Some products look alike, so read the label. A surge protector does not make an overloaded circuit safe, and it does not add capacity. ### How do I know my home needs more outlets? If you use cords or strips every day, if you run them across rooms, or if the breaker trips when devices share a circuit, you likely need more outlets. ESFI says heavy reliance on cords means too few outlets. A licensed electrician can add outlets or circuits. ## Terms on this page - [Point-of-use surge protector](https://danielelectric.multisites.ai/glossary/point-of-use-surge-protector) - [Whole-house surge protector](https://danielelectric.multisites.ai/glossary/whole-house-surge-protector) - [Surge protective device](https://danielelectric.multisites.ai/glossary/surge-protective-device) - [Dedicated circuit](https://danielelectric.multisites.ai/glossary/dedicated-circuit) - [Electrical panel](https://danielelectric.multisites.ai/glossary/electrical-panel) - [Receptacle](https://danielelectric.multisites.ai/glossary/receptacle) - [Tripping](https://danielelectric.multisites.ai/glossary/tripping) - [Voltage](https://danielelectric.multisites.ai/glossary/voltage) - [Outlet](https://danielelectric.multisites.ai/glossary/outlet) ## Sources 1. [ESFI: Extension Cord Safety Tips](https://www.esfi.org/extension-cord-safety-tips/) 2. [CPSC: CPSC Warns Consumers About Faulty Extension Cords, Power Strips and Surge Protectors](https://www.cpsc.gov/Newsroom/News-Releases/1999/CPSC-Warns-Consumers-About-Faulty-Extension-Cords-Power-Strips-and-Surge-Protectors) 3. [NFPA: Electrical Safety in the Home](https://www.nfpa.org/education-and-research/home-fire-safety/electrical-safety-in-the-home) 4. [NFPA: Electrical Safety in the Home, major appliances](https://www.nfpa.org/education-and-research/home-fire-safety/electrical-safety-in-the-home) Written by Daniel Electric and checked against the sources above on July 20, 2026. City rules and product guidance change, so check the linked page before you act. ## Keep reading - [Whole-House Surge Protection: How It Works and Whether You Need ItA whole-house surge protector is a device at your panel that limits short voltage spikes before they reach your appliances and wiring. It does not stop every event, such as a direct lightning strike or an outage. Many homeowners pair it with plug-in protectors at sensitive electronics. A licensed electrician installs it.](https://danielelectric.multisites.ai/guides/whole-house-surge-protection) - [Why Does My Breaker Keep Tripping? Causes and Next StepsA breaker trips to stop too much current. The usual causes are an overloaded circuit, a short circuit, a ground fault, an arc fault, or a worn breaker. Reset it once. If it trips again, leave it off, unplug what is on that circuit, and call a licensed electrician.](https://danielelectric.multisites.ai/blog/breaker-keeps-tripping) - [Home Electrical Safety Checklist for North Texas Homes: Room by RoomWalk your home room by room and look for damaged cords, warm plates, overloaded outlets, missing GFCI protection, and alarms that are old or untested. Fix simple habits yourself. Call a licensed electrician for anything inside a panel, outlet box or wall, or for warning signs such as burning smells.](https://danielelectric.multisites.ai/guides/home-electrical-safety-checklist) - [Electrical problems and emergencies: what to do first, what to never touch and who to callFor fire, smoke, sparks or a downed power line, leave the area and call 911. For a utility outage, call your utility. For a breaker that keeps tripping, a dead outlet or a warm panel, stop using the circuit and call a licensed electrician. Never open a panel or touch a fallen wire.](https://danielelectric.multisites.ai/guides/emergency-electrical-help) - [Whole-house surge protection and home safety devices: what each one does and where it fitsA whole-house surge protective device guards your wiring and electronics from voltage spikes. A GFCI cuts power fast when current leaks to ground. An AFCI watches for dangerous arcing. Smoke and CO alarms warn you of fire and gas. Each device covers a different risk, so they work as a set.](https://danielelectric.multisites.ai/guides/surge-protection-and-home-safety) - [After a North Texas Storm: Electrical Checks Before Power ReturnsAfter a storm in Southlake, Grapevine, or Keller, stay away from downed lines and call 911. Oncor says damaged equipment on your house, like the meter base or weatherhead, needs a licensed electrician before power can be restored. Do not touch wet panels or flooded outlets. Call an electrician for any damage.](https://danielelectric.multisites.ai/blog/after-a-north-texas-storm-electrical-checks) TECL #21005 · Family owned since 1988 ## Need an electrician in Southlake? Call and tell us what is going on. A photo of the panel label or the problem helps us come prepared. Quotes on new installations are free. [Call (817) 481-8606](tel:+1-817-481-8606)[Get a quote](https://danielelectric.multisites.ai/contact) ![A Daniel Electric bucket lift raised to a parking lot light pole](https://danielelectric.multisites.ai/_astro/bucket-at-light-pole.BSVZ9eST_1Dp6XR.webp)