--- title: "2026 National Electrical Code in Texas: What to Know" description: "TDLR adopted the 2026 National Electrical Code for Texas, effective September 1, 2026. See what the notice says and why your city may list an older edition." url: https://danielelectric.multisites.ai/blog/2026-nec-texas-homeowners publisher: Daniel Electric phone: +1-817-481-8606 quote: https://danielelectric.multisites.ai/contact --- # 2026 National Electrical Code in Texas: What to Know The Texas Commission of Licensing and Regulation adopted the 2026 National Electrical Code as the state electrical code, effective September 1, 2026, with one limited exception for certain outdoor GFCI outlets. Your city may list an older edition, so ask your licensed electrician which rules apply to your job. Permits and codePublished September 1, 20264 min read ## What did Texas decide about the 2026 National Electrical Code? The Texas Commission of Licensing and Regulation adopted the 2026 National Electrical Code (NEC) as the state electrical code. TDLR, the Texas Department of Licensing and Regulation, posted the notice on September 1, 2026. The rule has an effective date of September 1, 2026. This is TDLR’s wording: “The adopted amendments adopt the 2026 National Electrical Code as the state electrical code, with a limited exception pertaining to ground-fault circuit interrupter requirements for certain outdoor outlets.” The rule is an amendment to 16 Texas Administrative Code, Chapter 73, section 73.100, for the Electricians program. The notice says the adoption justification ran in the August 28, 2026, issue of the Texas Register. Item What TDLR says Code adopted 2026 National Electrical Code Where 16 TAC Chapter 73, section 73.100 (Electricians program) Effective date September 1, 2026 Exception Limited, for GFCI requirements on certain outdoor outlets Read the glossary entries for [NEC](https://danielelectric.multisites.ai/glossary/nec), [NFPA 70](https://danielelectric.multisites.ai/glossary/nfpa-70), and [TDLR](https://danielelectric.multisites.ai/glossary/tdlr) for short definitions. ## What does that mean for a homeowner? For most homeowners, the main effect is on new electrical work, which licensed electricians will build to the adopted edition. TDLR’s notice does not list specific changes for homeowners, and this post does not guess at them. The NEC is a large book, and its changes are best explained by the electrician who will do your job. You do not need to read the code. You do need a licensed person to do the work. TDLR states that anyone doing non-exempt electrical work in Texas “must be licensed and perform that work through a licensed electrical contractor.” Our guide on how to [hire a licensed electrician in Texas](https://danielelectric.multisites.ai/guides/hire-a-licensed-electrician-texas) explains how to check a license. ### Will my existing wiring be out of code? The TDLR notice does not say that existing wiring must change, and this post makes no such claim. A home wired under an older code is not a problem by that fact alone. If you are unsure about the safety of older wiring, ask a licensed electrician for an inspection. Our post on [electrical checks before you buy or sell](https://danielelectric.multisites.ai/blog/electrical-checks-buying-selling-house) covers that. ### What is the GFCI exception about? TDLR says only that the exception concerns “ground-fault circuit interrupter requirements for certain outdoor outlets.” It gives no further detail in the notice. A GFCI is a device that shuts off power quickly when current leaks to ground, to reduce shock risk. Ask your electrician how the exception applies to an outdoor project, such as a patio, a hot tub, or a pool area. See our post on [hot tub and pool electrical safety](https://danielelectric.multisites.ai/blog/hot-tub-and-pool-electrical-safety). ## Why might my city list a different edition? Cities adopt and update codes on their own schedules, so a city page can show an older edition. Argyle’s Current Codes page, as of December 1, 2024, lists the 2020 NEC. That date is before the 2026 state rule. When you read a city page, note the date. Write “the city’s page lists” an edition, not “the city uses” it. Then ask the city building office or your electrician which rules apply to your permit. Our permit posts for Southlake, Keller, and Grapevine show what each city asks for. ## What should I do if I plan a project? Follow these steps: 1. Write down what you want done and where. 2. Ask a licensed electrician to review it and say which code rules apply. 3. Ask whether your city requires an [electrical permit](https://danielelectric.multisites.ai/glossary/electrical-permit) and an inspection. 4. Get a written quote before work starts. 5. Keep the permit record and the electrician’s paperwork. Do not do wiring work yourself. Anything inside a panel, outlet box, or fixture is work for a licensed electrician. See code compliance for what the term covers. ## Where can I read the official notice? TDLR posted its notice, “Commission Adopts Rules,” on its website under news and rulemaking for the Electricians program. The notice is short. It names the rule, the code edition, the exception, and the effective date. The full code book is published by NFPA, and it is written for trained electricians, not for homeowners. The notice also says the updated rule chapter will appear in the Texas Administrative Code on its effective date. For your project, you rarely need to read either text. A licensed electrician reads the rules for you and builds to them. What you need is a clear scope, a written quote, and the permit paperwork if your city asks for it. ## Next step Daniel Electric lists TECL #21005 as its Texas license. See the [residential electrician](https://danielelectric.multisites.ai/electrician) page, call (817) 481-8606, or use the quote form at [/contact](https://danielelectric.multisites.ai/contact) to ask about your project. Daniel Electric says it offers free quotes on new installations. ## Frequently asked questions ### When does the 2026 NEC take effect in Texas? TDLR's notice says the updated rule chapter is available in the Texas Administrative Code upon its effective date of September 1, 2026. The change is an amendment to 16 TAC Chapter 73, section 73.100, for the Electricians program. The notice also names one limited exception for certain outdoor outlets. ### Do I have to rewire my house to meet the 2026 NEC? The TDLR notice does not say that, and this post does not claim it. A code edition mainly guides new work and repairs that the code covers. If you plan a project, ask a licensed electrician which rules apply to it and whether your city requires a permit. ### Which code does my city use? It depends on the city, and city pages can lag behind the state. For example, Argyle's Current Codes page, as of December 1, 2024, lists the 2020 NEC. Check your city's page or call its building office, and ask your electrician what applies to your project. ## Terms on this page - [Electrical permit](https://danielelectric.multisites.ai/glossary/electrical-permit) - [Code compliance](https://danielelectric.multisites.ai/glossary/code-compliance) - [NFPA 70](https://danielelectric.multisites.ai/glossary/nfpa-70) - [Outlet](https://danielelectric.multisites.ai/glossary/outlet) - [GFCI](https://danielelectric.multisites.ai/glossary/gfci) - [TDLR](https://danielelectric.multisites.ai/glossary/tdlr) - [NEC](https://danielelectric.multisites.ai/glossary/nec) ## Sources 1. [TDLR: Commission Adopts Rules (September 1, 2026)](https://www.tdlr.texas.gov/news/rulemaking/2026/09/01/commission-adopts-rules-12/) 2. [TDLR: Commission Adopts Rules, effective date](https://www.tdlr.texas.gov/news/rulemaking/2026/09/01/commission-adopts-rules-12/) 3. [TDLR: Electricians](https://www.tdlr.texas.gov/electricians/) 4. [Town of Argyle: Current Codes](https://www.argyletx.com/420/Current-Codes) Written by Daniel Electric and checked against the sources above on September 1, 2026. City rules and product guidance change, so check the linked page before you act. ## Keep reading - [How to Hire a Licensed Electrician in Texas, and How to Check a License on TDLRTexas requires anyone doing non-exempt electrical work to be licensed and to work through a licensed electrical contractor. Ask for the contractor's license number, look it up on the TDLR license search, and get a written estimate with the company name, address, phone and license number.](https://danielelectric.multisites.ai/guides/hire-a-licensed-electrician-texas) - [Electrical Checks Before You Buy or Sell a HouseBefore you buy or sell, have a qualified person inspect the electrical system. Look at the panel, breakers, outlets, wiring type, and any old-home risks such as Federal Pacific panels or aluminum wiring. A licensed electrician can explain findings and give a written quote for repairs.](https://danielelectric.multisites.ai/blog/electrical-checks-buying-selling-house) - [Hot Tub and Pool Electrical Safety: What Owners Should KnowPools and hot tubs need GFCI protection, plus working grounding and bonding. NFPA says to have equipment inspected and maintained, and to hire an electrician experienced in these installations. Test GFCI devices as the maker directs. Never do pool or spa wiring yourself.](https://danielelectric.multisites.ai/blog/hot-tub-and-pool-electrical-safety) - [Electrical Preventive Maintenance for Commercial Facilities: What to Inspect and Who Does WhatCommercial electrical preventive maintenance is a planned program of inspection, testing and repair that finds problems before they cause outages, fires or injuries. A good program covers panels, connections, lighting, GFCI devices and emergency lighting, keeps written records, and assigns clear roles to the owner, tenant and electrician.](https://danielelectric.multisites.ai/guides/commercial-electrical-maintenance) - [Commercial electrical services for DFW facilities: maintenance, lighting, finish‑outs and new constructionCommercial electrical work keeps a building safe, lit and running. It covers facility maintenance, repairs, lighting and parking lot lighting, tenant finish-outs and new construction. Plan maintenance before things fail, give your electrician clear drawings and access, and ask for a written scope and schedule.](https://danielelectric.multisites.ai/guides/commercial-electrical-services) - [Electrical Panel Replacement: When It Is Time, Why, and What the Job InvolvesAn electrical panel replacement swaps the box that feeds every circuit in your home. Homes get new panels for more capacity, damage, unsafe brands, or a remodel. A licensed electrician sizes the new panel, pulls any needed permit, arranges the utility disconnect, installs the panel, and passes inspection. Ask for a written quote.](https://danielelectric.multisites.ai/guides/electrical-panel-replacement) TECL #21005 · Family owned since 1988 ## Need an electrician in Southlake? Call and tell us what is going on. A photo of the panel label or the problem helps us come prepared. Quotes on new installations are free. [Call (817) 481-8606](tel:+1-817-481-8606)[Get a quote](https://danielelectric.multisites.ai/contact) ![A Daniel Electric bucket lift raised to a parking lot light pole](https://danielelectric.multisites.ai/_astro/bucket-at-light-pole.BSVZ9eST_1Dp6XR.webp)